Maker Pro
3DR

DIY: 2 Simple Magnet Motors You Can Make

March 11, 2020 by Happy Toy
Share
banner

That's pretty funny,There you have got plainly creating a dent in the battery does a pretty exact task of supporting it

Introduction: DIY: 2 Simple Magnet Motors You Can Make

material:

2.triple-a batteries

3.Some Copper wire

Step 1:

1.We're going to take a double-a battery and fix 3 of our rare earth magnets to the lowest of it

Step 2:

2. we want to take about one foot of our bare copper wire bend your twine in half and use a pair of pliers,To pinch where it's bent now, permit's bend the cord into a form of a coronary heart shape,You'll need to the touch the bent part of your twine to the pinnacle of your battery

Step 3:

3. we need to bend the 2 ends of our cord so that they will run directly across the center of Neodymium magnets if you,Have excess wire protruding too some distance trim that off,You'll additionally want to bend your wires to make certain that the 2 ends are parallel to every other,At this factor we ought to be able to make a small motor through setting the wire on top of the battery so that the 2,Ends of the wire are in contact with the magnets the wire ought .

Step 4:

And I'm looking for ways to make it stay in location so I think what I'm gonna attempt to do is I'm going to,Try and placed a tiny divot within the lower back of the battery so as to supply our little pivot factor some thing to live balanced in so,It does not fly off pretty so without problems,I even have a nail with a slightly dull head,and I'm going to try to line that up with the very center of the returned of the battery and,Lightly tap it with a hammer to give it a pleasing dent,I need to be careful of course that I do not stab into the battery,I do not recognize precisely what that could do, but I'm sure it wouldn't be appropriate,All right, it truly is now not bad, permit's attempt that out and spot if it's gonna work. That's working pretty well,Oh my gosh,And it's spinning so fast that it is inertia is inflicting the battery and magnets to rotate the alternative path a touch bit. That's pretty funny,There you have got plainly creating a dent in the battery does a pretty exact task of supporting it stay centered,And it would not fall off as without problems

And I'm looking for ways to make it stay in location so I think what I'm gonna attempt to do is I'm going to,Try and placed a tiny divot within the lower back of the battery so as to supply our little pivot factor some thing to live balanced in so,It does not fly off pretty so without problems,I even have a nail with a slightly dull head,and I'm going to try to line that up with the very center of the returned of the battery and,Lightly tap it with a hammer to give it a pleasing dent,I need to be careful of course that I do not stab into the battery,I do not recognize precisely what that could do, but I'm sure it wouldn't be appropriate,All right, it truly is now not bad, permit's attempt that out and spot if it's gonna work. That's working pretty well,Oh my gosh,And it's spinning so fast that it is inertia is inflicting the battery and magnets to rotate the alternative path a touch bit. That's pretty funny,There you have got plainly creating a dent in the battery does a pretty exact task of supporting it stay centered,And it would not fall off as without problems

Neodymium Rare Earth magnet

buy Rare Earth magnet

Author

Related Content

Categories

Comments


You May Also Like