Maker Pro
Maker Pro

Copying of eprom to eprom

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Basically you need to find a programmer for this chip.

Most (all?) programmers allow you to read the contents of an EPROM, so you fit the original, read it, replace with a blank one, and burn it.
 

Kubas

May 16, 2011
2
Joined
May 16, 2011
Messages
2
First of all thanks for fast reply, secondly, do you have some solution for me? Where to start finding etc.

d
 

nbw

May 8, 2011
48
Joined
May 8, 2011
Messages
48
:D Good one! So you're telling me you type something into this Google thing and it comes up with all kinds of suggestions / possibilities??? You know, that might catch on one day ;)
 
Last edited by a moderator:
Top