Maker Pro
Maker Pro

DIN5 To DB15 (d-sub15) RS485

tobbski

Sep 4, 2012
3
Joined
Sep 4, 2012
Messages
3
Hello folks,

I have been searching high and low on the net and.. no luck.

I need to make a 15 pin D-Sub to 5 pin MIDI cable.
I have a new midi cable. I went out and bought the required d-sub jack with casing.
I have a soldering iron. And the guy at the electronic store told me that It can be done (with confidence).. it seems that I just need to find out which of the 5 midi wires connect to the particular d-sub pins.

I patiently await your help-suggestions-and advice.

Thanx
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
So you just leave out the "in" portion of the schematic. Where's the catch?
 
Top