Just fiddling with a breadboard and voltage regulators.
Attached is a rough schematic of my layout.
I am not getting the correct output from the regulator.
Have tried 5V 9V and 15V Volt regulators but the output is always the same 25.3V
Obviously I doing something very basic wrong. Tried 2 different Voltage sources but same result.
Can someone please point me in the right direction?
Thanks
Attached is a rough schematic of my layout.
I am not getting the correct output from the regulator.
Have tried 5V 9V and 15V Volt regulators but the output is always the same 25.3V
Obviously I doing something very basic wrong. Tried 2 different Voltage sources but same result.
Can someone please point me in the right direction?
Thanks
Last edited by a moderator: