akash bhatia
- May 19, 2016
- 6
- Joined
- May 19, 2016
- Messages
- 6
i want to know where will be the battrey connceted and second in the circuit there is component name tsop 36k ..how i will connect thisThese schematics are o.k., If you want to modify them, go ahead and just do it.
Where's the question?
the positive terminal goes to +4-2 v right and the negativa will be connected to earth wiire rightThe battery is connected from 4.2V to Ground (the three little dashes in the lower left).
TSOP36k is a 36kHz infrared receiver. There are many variants available, see e.g. here (there are also datasheets on this page).
in this pic i mark some black points where it will join in tsopthe positive terminal goes to +4-2 v right and the negativa will be connected to earth wiire right
A lithium-polymer accumulator (rechargeable battery) with an operating voltage of 3.7V to 4.2 V is required.Li-pol accum voltage 3,7-4,2 volts
and what about to join tsopA lithium-polymer accumulator (rechargeable battery) with an operating voltage of 3.7V to 4.2 V is required.