Maker Pro
Maker Pro

One hand Glove Quadcopter Transmitter (Arduino project)

jaosef

Apr 22, 2015
3
Joined
Apr 22, 2015
Messages
3
Just wanted to share my latest build video. The project was made by me in 2014, but I never made a video of the build process.

The quadcopter inclination is controlled by the inclination of the hand (using an acceleromter + gyro).

The box is a bit bulky, but it can be made much smaller by bypassing the big circuit board and using only the transmitter module. Could not find the datasheet for that though, so I used the whole circuit board.

Anyway, I hope you like it

Best regards
Josef
 
Top