Maker Pro
Maker Pro

Transmiter sudden no power

Peter Nguyen

Nov 3, 2016
2
Joined
Nov 3, 2016
Messages
2
I hope someone can help. I have a Devo 7e transmitter and I have done all the mods. Working fine for months now . The last it worked I just set it down to let me dog out and when j picked it up, there was no power. I turned it off and on and off and on. Took I apart and checked connections. Everything good. Did continuity test for power. I even changed the on/off switch. Tried connecting through computer, still nothing. I am clueless. Please any help if possible.
 

Peter Nguyen

Nov 3, 2016
2
Joined
Nov 3, 2016
Messages
2
It has been working fine for months. Out of the blue it stopped powering on. Literally I was flying with it then set it down for ten seconds. When I picked it up it was dead. I though it was the battery ....but nope. The switch taken apart did have a deep scratch from it being used so much. So I replaced the switch. But still nothing.
 
Top