GamingAddict
- Apr 26, 2017
- 38
- Joined
- Apr 26, 2017
- Messages
- 38
I recently ordered 5 amplifiers from Aliexpress which are all the same kind - TDA2030A. Ive got some speakers lying around that i could build a speaker out of. I havent come up with a design yet where im exactly going to put the speakers, but ive got a box for the speaker and the speakers themselves, the amplifiers havent came yet. In the mean time, my design is - have a speaker for low freqs at the bottom, middle ones at the middle of the box, and the highs handeled by 2 small tweeters from a car that i salvaged some time ago. All the amplifiers output the same amount of wattage and freq range, i want to use 3 amplifiers in total - 1 for the lows, 1 for the mids, and 1 for the 2 car tweeters, but the problem is, how can i filter out the unneeded frequencies for each speaker, i know how to do it for tweeters - just put a capacitor before the tweeter, but how can i filter out the audio for the remaining 2 speaker kinds and what should be the freq range for each speaker that i should use ( For example - 0 - 300hz for sub )?