Maker Pro
Maker Pro

FM inductors

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Look at the picture on that website. At the rigt you see the two hand-wound inductors. Just make sure your's look the same.

Note that at 6 W or even "only" 500 mW this transmitter will fall under regulations in most countries. Make sure you observe the local regulations where you want to use this transmitter.
 

CDRIVE

Hauling 10' pipe on a Trek Shift3
May 8, 2012
4,960
Joined
May 8, 2012
Messages
4,960
Being owner of two topics that are essentially asking the same question will not win you our favorite "Nube Of The Month" award. o_O
FM Transmitter Power

Chris
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
Being owner of two topics that are essentially asking the same question will not win you our favorite "Nube Of The Month" award. o_O
FM Transmitter Power

Chris

agreed .... threads now merged but not with the one you thought, Chris .... but an earlier one
 
Last edited:

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
I doubt that it will produce 6W and anything over 1 watt will probably be a very dirty signal

read what you were told above
 

CDRIVE

Hauling 10' pipe on a Trek Shift3
May 8, 2012
4,960
Joined
May 8, 2012
Messages
4,960
agreed .... threads now merged but not with the one you thought, Chris .... but an earlier one
Dave, I think most would question themselves as to exactly how that happened. It's still happy hour here. So I'll just try to figure it out later. :):confused:

Chris
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
Dave, I think most would question themselves as to exactly how that happened.

I recognised the link he had in the post as being the same as the one in the inductors post
so moved it here instead :)
 
Top