Maker Pro
Maker Pro

Treadmill control board SIP 20 Pin part number required.

Venkij2ee

Oct 17, 2018
3
Joined
Oct 17, 2018
Messages
3
Hello all,
I am having the issue with Shanghai e way treadmill control board, which is suddenly stooping after 5 mins walk. I am suspecting the 20 PIN SIP. can you please give the part number for this if anyone knows.eway_b204_s09-1.jpg
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Why do you think we can read the inscription on this module in a side view?
Give us a chance and a good front view of the module with its inscription, please.
 

Venkij2ee

Oct 17, 2018
3
Joined
Oct 17, 2018
Messages
3
Why do you think we can read the inscription on this module in a side view?
Give us a chance and a good front view of the module with its inscription, please.

Hello Sorry Sir, That is not my treadmill controller. I picked previously posted pic from google(mine is same like that but no print). I am uploading mine here.B304S10.jpg
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
There is still no inscription visible. Take a picture from the side.
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Your first picture intimates that there ARE some markings on the face of the device:

SIP.png

If you can't show or tell us what these markings are then you won't ever find a replacement - assuming that the SIP is the actual fault of course.....
 

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
Could also well be a OEM own custom part, often done.
M.
 
Top