Maker Pro
Maker Pro

Wanted: Wanted: Ramsey AR2 receiver, kit or assembled.

Status
Not open for further replies.

Externet

Aug 24, 2009
891
Joined
Aug 24, 2009
Messages
891
Hi.
If you have one of those receivers behind the spider webs, let me know
 

KMoffett

Jan 21, 2009
723
Joined
Jan 21, 2009
Messages
723
I just realized that the AR2 has a display. So, I must have the AR1. I added a sawtooth voltage in place of the tuning pot, and fed the audio to the X on a scope and the sawtooth to the Y. It made a nice, crude spectrum analyzer. :)

Ken
 

Externet

Aug 24, 2009
891
Joined
Aug 24, 2009
Messages
891
Thank you, Ken. The AR2 display is highly convenient to have and be able to tune accurately instead of a guessy dial. I will look at the AR1 you mention to see if could be used by adding a frequency display without much complications.
Another reason for the AR2 unit is that would be good to find/build its AR2L option am after.
 
Status
Not open for further replies.
Top