Maker Pro
Maker Pro

Fried pcb for led lamp

Joni

Feb 14, 2023
4
Joined
Feb 14, 2023
Messages
4
Ceiling lamp pcb got fried after it was installed incorrectly. cables from out end of transformer, were plugged in red to black and black to red.
The lamp has a panel and rgb led strips. It aslo coes with a controler.

I think all I have to do is replace the voltage regulator that got fried.
6D92F9D5-D9E0-40B8-A7D1-7EA356E3475C.jpegF8B840B4-C07B-4113-9C90-A76A290C331D.jpeg
As seen on the pictures above I removed the capacitor that was covering the burnt component.51B6A5C6-529E-405B-A42A-07CAA4628E7A.jpeg
I also removed the glue
1C679619-15DE-4C0C-A93B-086F75765057.jpeg
I can Identify the component as a SOT89 78L…. Rest is missing
I think it’s a voltage regulator.
But I have no Idea what voltage I need .
Here is another picBDEA5DCF-FBDD-4284-A427-3042AC7E0A80.jpeg
 

Attachments

  • EAEC814B-6A97-4C66-BCE3-73C9394F3BAF.jpeg
    EAEC814B-6A97-4C66-BCE3-73C9394F3BAF.jpeg
    206.5 KB · Views: 11
  • 0935CE31-EFB5-4C7F-B620-DE23C6224FC1.jpeg
    0935CE31-EFB5-4C7F-B620-DE23C6224FC1.jpeg
    341.8 KB · Views: 13
  • 9AADD785-FEF9-4DA9-BC24-666C83BB0BDE.jpeg
    9AADD785-FEF9-4DA9-BC24-666C83BB0BDE.jpeg
    355.5 KB · Views: 10

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Possibly a 78L05 (5 V regulator) or 78L03 (3.3 V regulator).
Could be either one, the CPU HT66F018 can operat between 2.2 V and 5.5 V, so that is inconclusive. I'd start with the 3.3 V regulatro and switch to 5 V if 3.3 V doesn't work.

On the other hand, you're lucky if it is really only the voltage regulator, not more.
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
The diode at the bottom of the last picture is also likely shorted.
 

Joni

Feb 14, 2023
4
Joined
Feb 14, 2023
Messages
4
Big thanks for the replies, I’ll try to get a hold of the components. Might take a few months though, since ali express is the only place I was able to find the VRs…
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
since ali express is the only place I was able to find the VRs…
There are many suppliers such as Farnell, RS Components, Mouser etc that stock those items. Most countries have outlets too.
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
If the pinout matches and the technical spec do as well then float your boat!
 

Joni

Feb 14, 2023
4
Joined
Feb 14, 2023
Messages
4
Could you help picking the right diode to replace the one in the picture? I wanna add it to the order incase it’s broken too.
I’ve been trying to figure this stiff out on my own, but I’m not that well versed in this stuff
 
Top