-
Categories
-
Platforms
-
Content
Project Logs
Showcase your projects in here by creating a dedicated entry, which automatically creates a discussion thread.
This is a project is about building a midi controlled synth. I will be going through experimentation and planning of such a project. It will be written from my viewpoint, but I will be open to people making suggestions.
Uses hi-Z sounder IPO original hi-bright LED, runs from single 1.5V D-cell.
As the name suggests it, this is a 8 way Scart switch, bound to be mounted on my wall behind the TV.
MULTIMETER AS TEMPERATURE CONTROL VERSION ONE
ABOUT THE CIRCUIT
-Temperature Control Device (TCD) is single bit digital temperature control device which mechanically turns the relay ON and OFF as the result of temperature change.
-It uses normal digital multi meter as temperature reading screen.
- This circuit designed to control temperature in areas where the constant temperature is required throughout, or where the temperature must not exceed or decrease certain temperatures...
Design schematic of an all transistor J-K flip flop
A kickstarter project to create an Arduino Frequencymeter board.
This is a PMDC (Permanent Magnet DC Motor) Controller to control DC motor speed.
Using 1 watt UV LED's to expose and develop PCB for rapid prototyping.
A FPGA based implementation of the XXTEA algorithm that can be used to encrypt and decrypt a serial data stream.
I made a simple Flashing LED which is great for beginners with what I had lying around using the abundant 555 timer.
in a speed motor controller by arduino, we substitute the motor for electrodes, we will have an electrolysys machine. Failures are that electrodes solubilize, so, impedance increases a lot, or it becomes open circuit... or some ions sediments&form a short
