Maker Pro

Portable stereo/MP3 player for when I work outside

I'm revisiting a project I made a couple of years ago to improve the housing (& probably make it sound a bit better too).
  • 1 Test setup.jpg
    1 Test setup.jpg
    95.9 KB · Views: 39
  • 2 Layout & holes.jpg
    2 Layout & holes.jpg
    81.7 KB · Views: 8
  • 3 Wired & ready.jpg
    3 Wired & ready.jpg
    89.8 KB · Views: 8
  • 6 Project complete.jpg
    6 Project complete.jpg
    92 KB · Views: 8
  • Mini TF Reader in stereo.jpg
    Mini TF Reader in stereo.jpg
    88.9 KB · Views: 9
  • Mini TF readers.jpg
    Mini TF readers.jpg
    52.8 KB · Views: 9
  • 01- New case.jpg
    01- New case.jpg
    85.9 KB · Views: 5
  • 02 - New front cut.jpg
    02 - New front cut.jpg
    54.7 KB · Views: 5
  • 03 - Layout.jpg
    03 - Layout.jpg
    67.2 KB · Views: 5
  • 04 - All holes finished.jpg
    04 - All holes finished.jpg
    89.6 KB · Views: 5
  • 06 - Compartment parts.jpg
    06 - Compartment parts.jpg
    74 KB · Views: 5
  • 01- New case.jpg
    01- New case.jpg
    85.9 KB · Views: 9
  • 02 - New front cut.jpg
    02 - New front cut.jpg
    54.7 KB · Views: 8
  • 03 - Layout.jpg
    03 - Layout.jpg
    67.2 KB · Views: 9
  • 04 - All holes finished.jpg
    04 - All holes finished.jpg
    89.6 KB · Views: 9
  • 05 - Compartment parts.jpg
    05 - Compartment parts.jpg
    74 KB · Views: 9
  • 06 - Ready to close.jpg
    06 - Ready to close.jpg
    84.5 KB · Views: 9
  • 07 - Bottom & back.jpg
    07 - Bottom & back.jpg
    220.7 KB · Views: 9
  • 08 - Remote on end.jpg
    08 - Remote on end.jpg
    67.3 KB · Views: 78
  • 09 - Completed.jpg
    09 - Completed.jpg
    73.6 KB · Views: 11
Top