Maker Pro
Simulating time variable resistors

Simulating time variable resistors

LTSPICE allows control of the resistance of a standard resistor element by a voltage source. This can be used to set up the time variable resistance of a resistor by creating an equivalent time variable voltage source.

To do this, set up a voltage source and label the voltage source's output net with a descriptive name (e.g. Vresistance). In the value field of the time variable resistor set the value to R=V(Vresistance). Set up the voltage to represent the time variable behavior as expected, using e.g. PWL statements or any other suitable waveform.
1 V is equivalent to 1 Ω, 1 kV is equivalent to 1 kΩ etc.

Example: a resistor with a resistor varying sinusoidally between 10 Ohm and 30 Ohm at a frequency of 100 Hz.
TimeVaryingResistor.png

Figure 1-1 Example circuit showing time variable resistor.

Based on this source: http://electronics.stackexchange.com/questions/3623/ltspice-vary-a-resistors-value-over-time

SPICE help topics to look at: R., Resistor

Harald Kapp, 2017-02-08
Author
Harald Kapp
Views
933
First release
Last update
Rating
0.00 star(s) 0 ratings

More resources from Harald Kapp

Top