Maker Pro
Maker Pro

12 MHz oscillator with a Voltage range 120V

Status
Not open for further replies.

kazemihossein33

May 12, 2018
2
Joined
May 12, 2018
Messages
2
Hello friends
I need a 12 MHz oscillator with a Voltage range of 120V
Preferably designed with cross coupling and non-integrated circuits




If I had a problem with my sentences, I'd like to apologize because I'm not English
Thank you for your guidance
 

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
Your english is quite good but you will need to give much more information.
A range of 120V could be 100V to 220V.
120V power input?
120V output?
power?
load?
frequency accuracy?
waveform?
 

kazemihossein33

May 12, 2018
2
Joined
May 12, 2018
Messages
2
Your english is quite good but you will need to give much more information.
A range of 120V could be 100V to 220V.
120V power input?
120V output?
power?
load?
frequency accuracy?
waveform?

Thank you:)
The circuit information is as follows
Input Voltage Source: 120 V to 140 V DC
Output voltage: 120 V
Output current: 2A
Waveform: Sinusoidal


Schematic circuit
VVVVV
VVV
V
 

Attachments

  • US6680657B2.pdf
    93.5 KB · Views: 52

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Are you aware that at 120 V / 2 A you will generate heavy electromagnetic noise? What's the purpose of this oscillator? Is the purpose in line with the applicable regulations concerning short wave radio?
 

hevans1944

Hop - AC8NS
Jun 21, 2012
4,878
Joined
Jun 21, 2012
Messages
4,878
It has been more than a year since the first post on this thread. The OP disappeared the next day and has not been active here since then. So yet another "drive by" poster slinks back into their cave, unrewarded by an instant answer to their query...
 
Status
Not open for further replies.
Top