hey i am a newbie to electronics and am making a project that involes a 12v dc blower fan
Specs:
NMB
Model BG0903-B044-VTL
97mm x 33mm
12V
1.35A
Part Specifications
Product Type Blowers
Rated Voltage 12 (V)
Current 1.030 (A)
Air Flow 0.810 (m³/min)
Air Flow 28.60 (CFM)
Mass 210 (g)
Noise 54.5 (dB)
Static Pressure 342.0 (Pa)
Static Pressure 1.400 (H20)
Size 95.0 (mm)
Speed 3700 (min¹)
Thickness [L] 33.0 (mm)
i have wired it to a standard car 12v battery to test it out and it was hardly spinning at the rated 3700rpm and no where near the 54db noise,is there something needed to make it run better/faster,and also i am going to wire in a potentiometer how would i go about dojng this,cheers
Specs:
NMB
Model BG0903-B044-VTL
97mm x 33mm
12V
1.35A
Part Specifications
Product Type Blowers
Rated Voltage 12 (V)
Current 1.030 (A)
Air Flow 0.810 (m³/min)
Air Flow 28.60 (CFM)
Mass 210 (g)
Noise 54.5 (dB)
Static Pressure 342.0 (Pa)
Static Pressure 1.400 (H20)
Size
Speed 3700 (min¹)
Thickness [L] 33.0 (mm)
i have wired it to a standard car 12v battery to test it out and it was hardly spinning at the rated 3700rpm and no where near the 54db noise,is there something needed to make it run better/faster,and also i am going to wire in a potentiometer how would i go about dojng this,cheers
Last edited: