checkers1811
- Dec 25, 2010
- 1
- Joined
- Dec 25, 2010
- Messages
- 1
Is there anyone that has designed a high current resistive load switch using Power MOSFETs?
The intention is to run it with a PWM controller to adjust the current through the load from 0 to 100%.
I can handle most of this, but I have not done any high power DC work before.
The intention is to run it with a PWM controller to adjust the current through the load from 0 to 100%.
I can handle most of this, but I have not done any high power DC work before.
