Maker Pro
Maker Pro

1954 HMV radiogram record player change.

ZJS

Sep 2, 2023
41
Joined
Sep 2, 2023
Messages
41
Ok. I will order some banana plugs (4mm)
I will wire it up like you said first in your message.
If it doesn’t work then may I need to do the balancing resistor thing with it.
But I’m just hoping that it does work by just wiring it straight up.
Thank you
 

ZJS

Sep 2, 2023
41
Joined
Sep 2, 2023
Messages
41
I have just bought these
 

Attachments

  • image.jpg
    image.jpg
    312.7 KB · Views: 2

Bluejets

Oct 5, 2014
7,050
Joined
Oct 5, 2014
Messages
7,050
I have just bought these
If there are 2 sockets. one for the signal and one for the shield, then ok.
BUT, if it is the one socket, you will need RCA plug.

Honestly, sometimes it's like talking to a brick wall.

I'll repeat my previous warning although I doubt it will sink in, be careful what you connect where as there are high voltages in there, both AC and DC.
 

ZJS

Sep 2, 2023
41
Joined
Sep 2, 2023
Messages
41
The reason why I’ve asked so much is I’m not an expert and I just wanted to make sure that I do everything right as I’ve owned this for a very long time and I want full understanding of what to do - which I now have.
thank you for helping me with it.

Thank you
 

Bluejets

Oct 5, 2014
7,050
Joined
Oct 5, 2014
Messages
7,050
The reason why I’ve asked so much is I’m not an expert and I just wanted to make sure that I do everything right as I’ve owned this for a very long time and I want full understanding of what to do - which I now have.
thank you for helping me with it.

Thank you
Yes, I have sufficient experience to recognise that initially.
Warnings stand......
 

ZJS

Sep 2, 2023
41
Joined
Sep 2, 2023
Messages
41
Thank you. I will do just that... Just waiting on some fresh wires and banana plugs so I can make a good job of it. Thank you for your help
 
Top