A
AshTray700
- Jan 1, 1970
- 0
resolved all problems on this set after replacing power supply parts but
the horizontal hold, set seems to loose its hold and i have to push and
pull the power button to correct it (assumeing it forces it to reset) the
set has a choke for horizontal hold (it is somewhat automatic i think but
still allows adjustment) when attempting to adjust it, the darn thing
broke, i cannot find a suitable exact replacement, do i have any
alternatives for this, maybe a little more high tech and not so darn
touchy to adjust, like a half turn made the difference from flying left to
flying right. this crt and chassis are being used in a sylvania 8 track,
turntable, fm am, tv large console if it makes a difference because the
stereo components are about 7 inches away from the horizontal components
where as in the old set there were no electrical devices nearby that would
or could cause interference.
the horizontal hold, set seems to loose its hold and i have to push and
pull the power button to correct it (assumeing it forces it to reset) the
set has a choke for horizontal hold (it is somewhat automatic i think but
still allows adjustment) when attempting to adjust it, the darn thing
broke, i cannot find a suitable exact replacement, do i have any
alternatives for this, maybe a little more high tech and not so darn
touchy to adjust, like a half turn made the difference from flying left to
flying right. this crt and chassis are being used in a sylvania 8 track,
turntable, fm am, tv large console if it makes a difference because the
stereo components are about 7 inches away from the horizontal components
where as in the old set there were no electrical devices nearby that would
or could cause interference.
