Maker Pro
Maker Pro

1988 Pontiac Bonneville Radio

  • Thread starter William R. Walsh
  • Start date
W

William R. Walsh

Jan 1, 1970
0
Delco model #16066982...anyone have the pinouts for at least the power
connections?

I'd like to test it and see if it works. The connector has three blocks of
what look to be four terminals each.

I'm not quite sure how to get it apart to see if I could figure out which
pin does what, nor am I sure that I want to try.

William
 
W

webpa

Jan 1, 1970
0
Delco model #16066982...anyone have the pinouts for at least the power
connections?

I'd like to test it and see if it works. The connector has three blocks of
what look to be four terminals each.

I'm not quite sure how to get it apart to see if I could figure out which
pin does what, nor am I sure that I want to try.

William

Visit your local Pontiac dealer, with humility. If you're lucky, they
may look up the schematic on their on-line (or local) manual system
and hand you a print-out of the relevant connector. If you get
stonewalled...try another dealer.
 
Top