Maker Pro
Maker Pro

3.3v psu

sheldonstv

Jul 17, 2007
68
Joined
Jul 17, 2007
Messages
68
Heres a simple regulated psu i needed for a 0ne off unit
 

Attachments

  • 3V3PSU.jpg
    3V3PSU.jpg
    29.8 KB · Views: 124

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
Why not use an LM317T?
This will give a more consistent output and has a current limit.
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
There are plenty of fixed 3.3V regulators that will do the same job with only 3 parts (regulator + 2 caps.)

Bob
 

DLD

Nov 5, 2013
24
Joined
Nov 5, 2013
Messages
24
Show us your breadboard creation and we can help you more!!!
And
"Make sure you have the right wires going to the proper pin-outs on your resistor and IC"
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
DLD

this is quite an old thread, sheldon hasnt been active since his last post

Dave
 
Top