Heres a simple regulated psu i needed for a 0ne off unit
sheldonstv Jul 17, 2007 68 Joined Jul 17, 2007 Messages 68 Apr 14, 2013 #1 Heres a simple regulated psu i needed for a 0ne off unit Attachments 3V3PSU.jpg 29.8 KB · Views: 124
duke37 Jan 9, 2011 5,364 Joined Jan 9, 2011 Messages 5,364 Apr 14, 2013 #2 Why not use an LM317T? This will give a more consistent output and has a current limit.
BobK Jan 5, 2010 7,682 Joined Jan 5, 2010 Messages 7,682 Apr 15, 2013 #3 There are plenty of fixed 3.3V regulators that will do the same job with only 3 parts (regulator + 2 caps.) Bob
There are plenty of fixed 3.3V regulators that will do the same job with only 3 parts (regulator + 2 caps.) Bob
DLD Nov 5, 2013 24 Joined Nov 5, 2013 Messages 24 Dec 13, 2013 #4 Show us your breadboard creation and we can help you more!!! And "Make sure you have the right wires going to the proper pin-outs on your resistor and IC"
Show us your breadboard creation and we can help you more!!! And "Make sure you have the right wires going to the proper pin-outs on your resistor and IC"
davenn Moderator Sep 5, 2009 14,254 Joined Sep 5, 2009 Messages 14,254 Dec 13, 2013 #5 DLD this is quite an old thread, sheldon hasnt been active since his last post Dave