Maker Pro
Maker Pro

3008WFP cycling basic colors on power up

spike3333

Aug 11, 2021
1
Joined
Aug 11, 2021
Messages
1
Hello,

I have an old 3008WFP monitor that is out of warranty and started having an issue with ghosting colors. Another forum suggested examining the caps on the PCBs and see if any were bad and replace them. After doing that and reassembling the monitor, the monitor will only cycle basic colors on power up. I have researched this and it appears to be in "Burn In" mode. Is there a hard reset for this monitor or any way to get out of this mode?

Thanks,

Dwight
 
Top