Maker Pro
Maker Pro

32 bit read from AS8S512k32 sram ic

priyap0

Jun 6, 2014
2
Joined
Jun 6, 2014
Messages
2
I had a few doubts on this component.

Is there any application note for this IC. What is the recommended de coupling required? Is there any specifiec design/layout requriement? Any precautions to be taken while reading 32 bit data from the device?

Please help
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,540
Joined
Nov 17, 2011
Messages
12,540
All the technical data and timings you need are imho in the datasheet.

For decoupling use 100nF from Vcc to GND
 

priyap0

Jun 6, 2014
2
Joined
Jun 6, 2014
Messages
2
All the technical data and timings you need are imho in the datasheet.

For decoupling use 100nF from Vcc to GND
Thank you,
However, i have noticed that when performing 32 bit data read from this ram using FPGA, occasionally one byte is read as zero. That was why i wondered if there is any precaution to be taken when performing 32 bit read.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
Are there any precautions listed in the datasheet?

Are you sure you're not fudging any of the timings?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
I note that the datasheet seems to list separate timing for the first and subsequent reads
 
Top