Hello, I wanted to make 3v to 1000 volts inverter circuit. I already soldered circuit but it doesn't work. I wanted experts to look for errors in my circuit or even in author circuit. Here is link: http://circuitschematicelectronics.blogspot.com/2011/03/3v-to-high-voltage-inverter.html
I may have used inappropriate parts but I couldn't find original so I used such alternatives: instead of 24D506 transistor I used C547B 75d, instead 22M of resistor I used two 10M resistors. Also I don't know if I made properly tranformator. It has same number of turns but I ignored wire and core thickness. I used very thin copper wire(about ~0.1mm) and 5mm thick ferrite core.
There is no current in coils L3 and L2 too. There is current flow in transistor from emitter to collector.
I may have used inappropriate parts but I couldn't find original so I used such alternatives: instead of 24D506 transistor I used C547B 75d, instead 22M of resistor I used two 10M resistors. Also I don't know if I made properly tranformator. It has same number of turns but I ignored wire and core thickness. I used very thin copper wire(about ~0.1mm) and 5mm thick ferrite core.
There is no current in coils L3 and L2 too. There is current flow in transistor from emitter to collector.