Maker Pro
Maker Pro

40 Watt Fm Amplifier

ntiwari

Aug 12, 2012
3
Joined
Aug 12, 2012
Messages
3
Hey guys,
I wanted to build an fm amplifier (40 watts), but wondered if I could use unleaded parts. I was also wondering what would be the best board to put this on, I was thinking one of those radio shack copper boards.
Sorry I know this may sound kind of stupid to some of you but thanks for helping
Schematic and parts list in linkhttp://http://72.52.208.92/~gbpprorg/lpfm/40watt.html
 

davenn

Moderator
Sep 5, 2009
14,040
Joined
Sep 5, 2009
Messages
14,040
hi ntiwari,
welcome to the forums
apart from the legalities of this project .... for that power level you must have a station licence!

you can use surface mount components. the project must be built on etched PCB
You CANNOT use any form of perfboard
the datasheet for the device is likely to show a proper PCB etch pattern

cheers
Dave
 
Top