Maker Pro
Maker Pro

465m service manual w/ schematics

S

Steve

Anyone have the schematics for the 465m they'd be willing to share?
The only manual I've found is the TM from the Airforce and the
schematics are missing. Thanks,
Steve
 
D

DaveM

Steve said:
Anyone have the schematics for the 465m they'd be willing to share?
The only manual I've found is the TM from the Airforce and the
schematics are missing. Thanks,
Steve


http://bama.edebris.com/manuals/tek/465m/
--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Life is like a roll of toilet paper; the closer to the end, the faster it goes.
 
S

Steve

That's the same one, no schematics. All the other sites I find all
have that same manual. I guess I'll just have to bite the bullet and
pay for one.

Thanks for your help,
Steve
 
S

Steve

Are you sure it has schematics? I have an airforce manual which
happens to also be 236 pages with only 3 pages on section 6, no
schematics. On page 3 of the manual it states the manual is 257
pages, but the heart of section 6 is missing (it ends at page 134) so
it must be missing pages. I'd be willing to bet this is the same
manual, which seems to be the only one I can find.

Thanks, Steve
 
Top