Maker Pro
Maker Pro

52 inch magnavox tv showing the same channels

My television keeps showing the same channel. It will not show any of
the cable channels. The tv is showing the same channel on 5 tv channels
 
M

Meat Plow

Jan 1, 1970
0
My television keeps showing the same channel. It will not show any of
the cable channels. The tv is showing the same channel on 5 tv channels

Check the tuner.


--
#1 Offishul Ruiner of Usenet, March 2007
#1 Usenet Asshole, March 2007
#1 Bartlo Pset, March 13-24 2007
#10 Most hated Usenetizen of all time
#8 AUK Hate Machine Cog
Pierre Salinger Memorial Hook, Line & Sinker, June 2004
COOSN-266-06-25794
 
Check the tuner.

--
#1 Offishul Ruiner of Usenet, March 2007
#1 Usenet Asshole, March 2007
#1 Bartlo Pset, March 13-24 2007
#10 Most hated Usenetizen of all time
#8 AUK Hate Machine Cog
Pierre Salinger Memorial Hook, Line & Sinker, June 2004
COOSN-266-06-25794

When I program the tv channels automatically, the tv will not pick up
the cable channels. The cable works. I tried it on another tv. It use
to work on this tv. I purchase a universal remote and I believe it
unprogrammed the tv. I can still play my xbox and watch dvd's. I just
cannot watch cable.
 
When I program the tv channels automatically, the tv will not pick up
the cable channels. The cable works. I tried it on another tv. It use
to work on this tv. I purchase a universal remote and I believe it
unprogrammed the tv. I can still play my xbox and watch dvd's. I just
cannot watch cable.

Is there a factor reset option on magnavox rear projection tv's?
 
M

Meat Plow

Jan 1, 1970
0
Is there a factor reset option on magnavox rear projection tv's?

Maybe in the service man mode. You try unplugging the set for an hour or
so? (not that this will fix your problem)

--
#1 Offishul Ruiner of Usenet, March 2007
#1 Usenet Asshole, March 2007
#1 Bartlo Pset, March 13-24 2007
#10 Most hated Usenetizen of all time
#8 AUK Hate Machine Cog
Pierre Salinger Memorial Hook, Line & Sinker, June 2004
COOSN-266-06-25794
 
B

Bob Shuman

Jan 1, 1970
0
Check to make sure the TV is not in the "antenna" mode and set to cable
before trying to program it. Also make sure the cable feed and the patch
cable from the wall jack are both good. (Maybe that is what you meant by
knowing the cable is good.)

Bob
 
R

R!

Jan 1, 1970
0
[email protected] wrote in @n4g2000hsb.googlegroups.com:
My television keeps showing the same channel. It will not show any of
the cable channels. The tv is showing the same channel on 5 tv channels

The tuner is probably bad, usually gets 1 channel repeating on VHF (2-6)
but the actual channel is (cable 22 or 23)nothing on the rest.

This used to be quite common when I serviced sets about 10 years ago.

If the set is that old you may want to use a VCR on the video imputs and
use it to change channels.

Those tunuers are plated through hole or surface mount technology, a
little hard for the DIY crowd.

Give it some thought analogue will be dead in early 2009 here in the
USA.

R!!
 
Top