Maker Pro
Maker Pro

52" RCA Projo. T.V.



Jan 1, 1970
Thanks guys for the input, but I can find no bad connections even with
a powerfull magnifying glass.

RCA 52" Projo T.V., Model # P52937SG, Chassis # CTC 195M4, dead,
2SC5148 horizontal output shorted, all else ok, fine,
nice pix, convergence was fine, tap main board....pop goes the output!
Found no bad connections, & soldered the horiz drive area before
power to the unit. Q14301 driver looked overheated, but checks fine.
Anyone see this type of unseen bad connection? The board looks fine,
no leaks, & the convergence power supply looks fine. Thanks, Dani.