Maker Pro
Maker Pro

7 Segment LCD Display

Im using crocodile physics to simulate a circuit in which it counts up
to 9 and displays it on a 7 segment display.

I am using a BCD to seven segment decoder, but the outputs (a to g)
always remain 1 regardless of how I connect it

I would appreciate any help as I desperately want to finish it. I have
uploaded my version of crocodile physics and my circuit for anyone who
wants to have a look. Keep in mind that my vesion is very old (pre
2000).

Crocodile Physics:
http://s44.yousendit.com/d.aspx?id=26EMMJKPQQ3FC2G7258U5V3D5T

My Circuit:
http://s64.yousendit.com/d.aspx?id=3I9X0PSWT83I11OUWT15S3QWU7

please be speedy in your response

thx
 
Im using crocodile physics to simulate a circuit in which it counts up
to 9 and displays it on a 7 segment display.

I am using a BCD to seven segment decoder, but the outputs (a to g)
always remain 1 regardless of how I connect it

I would appreciate any help as I desperately want to finish it. I have
uploaded my version of crocodile physics and my circuit for anyone who
wants to have a look. Keep in mind that my vesion is very old (pre
2000).

Crocodile Physics:
http://s44.yousendit.com/d.aspx?id=26EMMJKPQQ3FC2G7258U5V3D5T

My Circuit:
http://s64.yousendit.com/d.aspx?id=3I9X0PSWT83I11OUWT15S3QWU7

please be speedy in your response

thx

i got the decoder to work properly now. However, I have connected the
decoder to the 7 segment display using decoders, but it doesnt light up
 
R

ray13

Jan 1, 1970
0
You need to change that circuit file name. I can't open it. Make it a
jpg or gif file.
 
Top