Maker Pro
Maker Pro

8-Pin Dip

tj107us

Apr 23, 2011
48
Joined
Apr 23, 2011
Messages
48
Hey guys, I have a 8-pin DIP IC that i'm am trying to find out what it is. I think it might be an optocoupler, but not sure. The numbers on the chip are:

M6964-3
KSS
95FO


I have tried looking on google, but all I can get is pages that wants me to put in a quote!!


thanks,
tj
 

davenn

Moderator
Sep 5, 2009
14,081
Joined
Sep 5, 2009
Messages
14,081
or 6 pin

the only reference I could find to M6964-3 was for a Fixed Output 10W CMOS Step-Up Switching Regulator

so you know what circuit it is in ... ie. you have the board? ... does it look like a power supply stage ?


Dave
 

tj107us

Apr 23, 2011
48
Joined
Apr 23, 2011
Messages
48
Well Dave, I might be screwed cause I have no clue what that chip went in. It was just an old chip I had laying around and just wanted to see what is was!


bob, your right! Dope, I feel stupid.


Hey guys i'll try and load a pic, do you think that might give you a clue what it might be, i mean I gave all the numbers and pin layout. It looks to have standard DIP pins(no mammoth size pins like it could be really heavy duty).
 

tj107us

Apr 23, 2011
48
Joined
Apr 23, 2011
Messages
48
sorry guys I don't know how to put a picture on here where makes it big, but I added it as a file!!!

M6964-3.jpg

[Mod note: there ya go :) ]
 
Last edited by a moderator:

davenn

Moderator
Sep 5, 2009
14,081
Joined
Sep 5, 2009
Messages
14,081
yup, will still go with what I posted earlier :)

it related to a KSS device

Dave
 
Top