..for me that is but should be a simple fix for some of you. I will try and explain what I am trying to do here without the vast knowledge of circuits and dialect.
What I what to fabricated is a 12v switching relay that is activiated by exactly 160ohms. This 160ohms will also continue to control another device at the same resistance since I will be splicing into the existing circuit for my coil feed.
So I believe what I will need is some sort of relay in which the coil is activated by 160ohms. Once activated the coil will close a set of contacts which in turn will allow 12volts to flow through the closed contacts to lets say a 12volt lamp @ 10amps+-.. Also I will need to maintain the resistance of the coil feed circuit @ 160ohms.
Any ideas? I'm sure this is a simple fix but again I am not that experienced with these types of circuits. Any help will be greatly appreciated!
What I what to fabricated is a 12v switching relay that is activiated by exactly 160ohms. This 160ohms will also continue to control another device at the same resistance since I will be splicing into the existing circuit for my coil feed.
So I believe what I will need is some sort of relay in which the coil is activated by 160ohms. Once activated the coil will close a set of contacts which in turn will allow 12volts to flow through the closed contacts to lets say a 12volt lamp @ 10amps+-.. Also I will need to maintain the resistance of the coil feed circuit @ 160ohms.
Any ideas? I'm sure this is a simple fix but again I am not that experienced with these types of circuits. Any help will be greatly appreciated!