Maker Pro
Maker Pro

A blender with digital control board fails

roughshawd

Jul 13, 2020
465
Joined
Jul 13, 2020
Messages
465
the cuisinart perished....
but the power button led turns on, and the control light flashes... just no motor.

So I pulled it apart.

The motor has 3J2452 on it and above those numbers is 10H0003.
I think the 3J2452 tells me the switching is done at 3 joules and the 2452 is 17hz or something, but I can't remember the formula.

even though it may need an irreplacable main board, I would like to undestand these numbers so I can build a set os switches for it. Its a great multiple use blender with food processor, ice crusher and has multiple speeds... I could replace those with a rheostat right?
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
No idea what the numbers mean.
Did you first check that the bowl locks on properly and activates the one or two safety switches?.
Also, some models have a motor reset switch.


Martin
 
Top