Maker Pro
Maker Pro

A parts identification mystery....

LlewellynFoxx

Jan 17, 2014
1
Joined
Jan 17, 2014
Messages
1
...With few clues!
So. One of my powered speakers gave out, opening the 'amped' one up this dropped out, so I'm making the huge leap of imagination that the broken thing needs replacing. But I have no idea what the broken thing is. Any feedback will be heartily received and much appreciated as life in Mono is getting me down!

The fragment retains the characters "6401" (top row) "MIC" (below) and is the same length as the speaker slot on the front of an iPhone (12mm ish).
 

Attachments

  • bit of thing.jpg
    bit of thing.jpg
    91 KB · Views: 131
  • IMG_1015.jpg
    IMG_1015.jpg
    136.2 KB · Views: 139
  • IMG_1016.jpg
    IMG_1016.jpg
    140.9 KB · Views: 138
  • IMG_1017.jpg
    IMG_1017.jpg
    136.2 KB · Views: 128

jpanhalt

Nov 12, 2013
426
Joined
Nov 12, 2013
Messages
426
It may be a 1N5401 diode, which is a fairly common size. Are you sure it is a 6 and not a 5? The usual package is a little smaller than 12mm. One datasheet lists the max length as 9.5 mm.

What are the markings on the adjacent diodes?

John
 
Last edited:

shrtrnd

Jan 15, 2010
3,826
Joined
Jan 15, 2010
Messages
3,826
It's definitely a diode.
Like jpanhalt says, check the other diodes in line with it, to be sure of the correct
part number.
 
Top