Maker Pro
Maker Pro

A simple fix

Little_grim

Jan 28, 2013
2
Joined
Jan 28, 2013
Messages
2
I am looking for a way to run a motor clockwise when I apply power and then when I remove power it must run anti-clockwise.

I have the motor attached to a latch and when you put batteries in the motor un-clips the latch and when you remove the batteries it locks again.

Additional Information:
I only want to use discrete components
the motor is a DC motor

Any help would be much appreciated.
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,613
Joined
Nov 17, 2011
Messages
12,613
and then when I remove power it must run anti-clockwise

How is the motor supposed to run at all if the power is removed?
 

CocaCola

Apr 7, 2012
3,635
Joined
Apr 7, 2012
Messages
3,635
Spring return solenoid would likely be better suited to the application...
 
Top