R
Randy Gross
- Jan 1, 1970
- 0
Greetings:
This question concerns the wire size used in the stator. My original plan
called for #20 AWG magnet wire but, I was thinking that I could use a
smaller diameter wire to increase the voltage above 120vac (more turns) and
then step the output down to 120vac. My only concern here is how will this
effect the generator as far as the demand for current from the load? I
would like the generator to handle a 10 amp load.
Randy Gross
This question concerns the wire size used in the stator. My original plan
called for #20 AWG magnet wire but, I was thinking that I could use a
smaller diameter wire to increase the voltage above 120vac (more turns) and
then step the output down to 120vac. My only concern here is how will this
effect the generator as far as the demand for current from the load? I
would like the generator to handle a 10 amp load.
Randy Gross