G
Gavin
- Jan 1, 1970
- 0
Hi,
Hoping someone can help me here.
I have a Accenta 8 System that was installed in 1996. So far it's been
excellent - no problems whatsoever.
This morning we suffered a power cut. The alarm was disarmed at the
time. Usually once power is restored I just dis-arm it as the alarm
sounds once power is restored. Today however this did'nt happen - no
alarm activation on power returning.
When I tried to activate it via the keypads there was no power to them
- no lights/beep when pressing the keys.
I switched the power off/on which gave the keypads light but they
still would'nt accept the code. Whipped the cover of the main unit -
the red power LED was out, when I touched it though it lit up (?).
Checked the 4 fuses - all OK. When I removed the fuse for the
'Bell/Strobe' the alarm went off. Replacing the fuse with the original
one deactivated the alarm. ....
Any ideas anyone.....
regards,
Gavin
Hoping someone can help me here.
I have a Accenta 8 System that was installed in 1996. So far it's been
excellent - no problems whatsoever.
This morning we suffered a power cut. The alarm was disarmed at the
time. Usually once power is restored I just dis-arm it as the alarm
sounds once power is restored. Today however this did'nt happen - no
alarm activation on power returning.
When I tried to activate it via the keypads there was no power to them
- no lights/beep when pressing the keys.
I switched the power off/on which gave the keypads light but they
still would'nt accept the code. Whipped the cover of the main unit -
the red power LED was out, when I touched it though it lit up (?).
Checked the 4 fuses - all OK. When I removed the fuse for the
'Bell/Strobe' the alarm went off. Replacing the fuse with the original
one deactivated the alarm. ....
Any ideas anyone.....
regards,
Gavin