Maker Pro
Maker Pro

Acetone+Flux=?

eptheta

Dec 20, 2009
188
Joined
Dec 20, 2009
Messages
188
I had a bit of marker left after etching my PCB and I wanted to get rid of it. I had already soldered a few chips on and they were rather close.
So i went ahead and put a bit of acetone on the marker. I missed.

The acetone and flux reacted and a whitish sticky residue is left. I have no idea what it is and I want to get rid of it. Anyone know what to put on it ?

Can i use isopropyl alcohol to get rid of the flux and/or the flux-acetone product ?

Thanks !
 
Top