Maker Pro
Maker Pro

Add BLUETOOTH to an old radio

JniTech

Aug 8, 2017
8
Joined
Aug 8, 2017
Messages
8
Hi,
I want to had bluetooth to my old SHARP CD BA125 radio I get this idea on YouTube . But I have difficulty too understand how. There is his plan. I only want Bluetooth so RCA line in I dont need and for the Input Selector I will use a button. All the stuff I need to find because the link of the video was for US an I am Canadian.

XS3868 Bluetooth Audio Receiver
Adjustable Buck Regulator
Prototype Paper

That all I think I need. My question are where the input of The Buck regulator is connected , how hi connected the bluetooth with the Buck Regulator what is the black thing it not on the plan and my last question is on the video the guy have a Buck Regulator 50 V to 35 V But in the description the link is a Buck Regulator 35 V to 35 V wich one is the good.

Thanks for helping
 

dorke

Jun 20, 2015
2,342
Joined
Jun 20, 2015
Messages
2,342
The way that guy does this is very cumbersome.
You can use one of those gizmos and save yourself a lot of trouble.
It can be powered by the most common USB charger.

It requires you to add a line- in input to your radio.
That isn't complicated,especially if you are willing to do it instead of the tape.
 
Last edited:
Top