Maker Pro
Maker Pro

ADemco Vista 40 issue, undoubtedly user error

larryfirman

Dec 23, 2010
1
Joined
Dec 23, 2010
Messages
1
Greetings, all.

After a dinner preparation disaster, the smoke alarm was activated (too late, I see that a heat alarm would be more suitable for a kitchen).

Now the keypad shows the fire code, & the message NOT READY. I've huffed & puffed & cleaned the smoke detector as best I can, but entering the code + off, as the manual states, is ineffective.

In my community, a security service, rather than an alarm company, does the monitoring, but they have the same knowledge level as yours truly.

I'd appreciate your suggestions. Thank you in advance. Larry, Baton Rouge
 
Top