Maker Pro
Maker Pro

Alternative switch

steve_venkat

May 22, 2017
30
Joined
May 22, 2017
Messages
30
Friends.In my project I'm using this switch to control the signal from EEPROM to PIC.If I need PIC to communicate with EEPROM means i will use this switch to connect the SCL and SDA lines...Because i'm using 5 EEPROMS.

I'm planning to move to electronic switch like ULN2803A.I tried with ULN2803A but it not working...
Please suggest me an IC that can replace the switch.
 

Attachments

  • dipswitch$082915560(240).jpg
    dipswitch$082915560(240).jpg
    6.8 KB · Views: 64
Top