D
D from BC
- Jan 1, 1970
- 0
Getting photoresist chemicals...ugh...That's not on every store
shelf..
Of course there are presensitized PCB's..
And there's the toner transfer methods..
And there's EDM, routing and sandblasting.
How about using UV adhesive...
I could spread UV adhesive on a PCB...
Then put a transparency on top with the PCB pattern and then put a
heavy glass plate on top of that.
Expose to UV..
Rince in _________.
Etch
Then strip the board with _______.
I don't know the blanks yet..
UV glue is about $30.00US/25cc. (Hughes) or $8.00US/2cc on Ebay
Can I get rich? $$$
D from BC
shelf..
Of course there are presensitized PCB's..
And there's the toner transfer methods..
And there's EDM, routing and sandblasting.
How about using UV adhesive...
I could spread UV adhesive on a PCB...
Then put a transparency on top with the PCB pattern and then put a
heavy glass plate on top of that.
Expose to UV..
Rince in _________.
Etch
Then strip the board with _______.
I don't know the blanks yet..
UV glue is about $30.00US/25cc. (Hughes) or $8.00US/2cc on Ebay
Can I get rich? $$$
D from BC