Maker Pro
Maker Pro

Anybody knows the version in smd from this connector?

OLIVE2222

Oct 2, 2011
690
Joined
Oct 2, 2011
Messages
690
They don't look to exist in SMD version, you can maybe use pin in paste method.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
I agree. Another alternative is to bend the pins at right angles (the same way surface mount pins are bent) and solder them to the board.

The reason these are probably not available as surface mount is that the load placed on the connector is perhaps best transmitted to the board rather than to the glue holding the copper to the board.
 
Top