Maker Pro
Maker Pro

Anyone able to help with this project?

PNWSushikid

Sep 27, 2022
1
Joined
Sep 27, 2022
Messages
1
Hi all,

I'm designing a piece of jewelry that incorporates some very small electrical components. I'm extremely novice when it comes to even basic electrical stuff so I appreciate any form of help I could get with this. First off, I'm curious if I have even got the right components and if this will even work. Secondly, wondering how might I go about wiring this together and the setup for getting this to work properly. I've attached a pdf with a basic schematic of how it would ideally work.

Thanks!

- T
 

Attachments

  • RingIdeaSpecs.pdf
    1.2 MB · Views: 11

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Don't know about others but I won't open a pdf from an unknown source no matter what.........

Post the images direct to this site.
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Both battery and LED have the same part numbers.
 

Attachments

  • 1172F2B1-66EF-4D6D-B508-EFEB9EE98B50.png
    1172F2B1-66EF-4D6D-B508-EFEB9EE98B50.png
    181.3 KB · Views: 7
Top