Maker Pro

Arduino compatible high precision frequency meter

A kickstarter project to create an Arduino Frequencymeter board.

Pandauino

Mar 2, 2017
1
Joined
Mar 2, 2017
Messages
1
Pandauino submitted a new Showcase Item:

Arduino compatible high precision frequency meter

Hello,

I would like to expose you a project that I started already 4 monts ago and it is running at low speed. It is much more complicated than I expected. I had to change the design, find a manufacturer and source components etc. So now I am prototyping the board and I guess I will have to prototype a couple of version to reach the goal. I built a WP page to present the project there : http://pandauino.com/wp/en/home/

One of my problems now is that if I don't want to hand solder all prototypes and also If I want to test a board that would be more like an industrialized one, I would need to reflow it. I don't have anything else than a hot plate and a innacurate temperature probe on a multimeter. I also bought solder paste http://www.ebay.fr/itm/291911550216?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

and I am not very at ease to solder it in my one bedroom appartment! I wonder how to solder this smd prototype for 1) the least cost 2) the best result 3) without being poisoined by lead!

Here is the first prototype PCB that I hand solder now since I don't master reflow and I have to check and even correct things during the making.

Read more about this showcase item here...
 
Top