Hay Jack my tv blows a fuse . i got a box of fuses and it blew all 6 of
them so i put a nail in the fuse holder and it started smoking and now
there there is no picture . Whats wrong ? i am a profeshunal tv
teknishun .
mee two
furst r you shure that the power coord has volts flowing in it? u
need 2 find out. cut it off near the back of teevee set (u did unplug
it first didnt u? [...if not u probly wont need 2 read the rest of
this] remoov the insulation from the wirz neer where u made the cut
and make shure that the bare wirez r about 1 quarter inch a part. now
then 2 make shure that the coord is a live u need to furst identifeye
the most sensitive part of your bodie. tutch the bare wires to that
spot then plug the power coord into the sockit. if u feel a sensasun
from the wirez u need 2 replace the pitcher tube it probably needs a
new one anyway and your stoopid customer who doesnt no a wire from a
transister will probly pay for it anyway without question. if that
dozent work try replacing some of the modulez and if the set has no
modulez try replacing other tubes or the eaziest to replace
tranzisters first. before dewing all that thow u mite want two trie a
better fuze. try sticking your finger in the fuze holder and see if
that workz. if all else failz replace the nail and poor water on the
set if it still dozent werk or if it starts smoking yore customer
needz 2 have u reconshun it..
-jack [the real pro tech who is proud to not know how to praktice
electronics as a hobbie like the loozers]