Graham1982
- Oct 29, 2012
- 2
- Joined
- Oct 29, 2012
- Messages
- 2
Dear all:
I am currently building a PC into an old 1940s/50s TV cabinet having re-veneered it. My plan is to use one of the rotary switches on the control panel to power the PC on so it looks as original ish as possible.
I was just thinking of extending the wires from the connector on the board to the relevant connectors on the rotary switch. I understand this will stop the 'hold for a few seconds and PC will switch off' function however, other than this, will this work or am I missing something?
Thanks
Graham
I am currently building a PC into an old 1940s/50s TV cabinet having re-veneered it. My plan is to use one of the rotary switches on the control panel to power the PC on so it looks as original ish as possible.
I was just thinking of extending the wires from the connector on the board to the relevant connectors on the rotary switch. I understand this will stop the 'hold for a few seconds and PC will switch off' function however, other than this, will this work or am I missing something?
Thanks
Graham