Maker Pro
Maker Pro

auto scan fm radio problem

SAADELDIN

Oct 29, 2018
5
Joined
Oct 29, 2018
Messages
5
I have china-made auto-scan FM radio
It was able to receive frequencies from 88MHz up to 103.3 MHz
but not able to detect 98.2
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,507
Joined
Jan 21, 2010
Messages
25,507
Can you manually tune it to 98.2MHz?

Does it skip this frequency when scanning, or not recognize it as a station while scanning?

How strong is this station compared to the weakest ones the scanner can find?
 

H2814D

Nov 4, 2017
111
Joined
Nov 4, 2017
Messages
111
I had this problem with an old AC Delco FM receiver. Although I was also only having a problem with one or two stations, the antenna was the problem. Try a different antenna before messing with anything else inside. Also, if that doesn't work and you are going to open it up, check the antenna connections inside the case.
 

SAADELDIN

Oct 29, 2018
5
Joined
Oct 29, 2018
Messages
5
HI SIR
WE CAN T MANUALLY TUNE AT 98.2MHZ.
IT SKIP THIS FREQUANCY WHEN SCANNING.
WE HAVE MANY PCBA FOR THIS MODEL SOME PIECES DETECT FREQUENCY VERY GOOD AT SAME PLACE AND SAME ANTENEA,OTHER SKIP IT,AND WE HAVE SOME OLD SAME PCBA THAT WAS DETECT THIS FREQUENCY BEFORE AND NOW SKIP IT TOO.

FOR THIS I THINK THERE S NO ANTENEA OR FREQUENCY PROBLEM
 
Last edited by a moderator:

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,507
Joined
Jan 21, 2010
Messages
25,507
OK THAT SOUNDS FINE. BUT CAN WE STOP SHOUTING?
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,507
Joined
Jan 21, 2010
Messages
25,507
CAN WE STOP SHOUTING? IT MAKES MY EYES BLEED.
 

SAADELDIN

Oct 29, 2018
5
Joined
Oct 29, 2018
Messages
5
(CAN WE STOP SHOUTING? IT MAKES MY EYES BLEED)
I CAN T UNDERSTAND WHAT YOU MEAN
 
Last edited by a moderator:

davenn

Moderator
Sep 5, 2009
14,126
Joined
Sep 5, 2009
Messages
14,126
and you still haven't given us the make and model of your radio

have you looked online for a service manual or schematic ?
 

SAADELDIN

Oct 29, 2018
5
Joined
Oct 29, 2018
Messages
5
its chinese pcba have 3 ics fm ic 5807 ,2402 and microcontroller i will send photo to you
 

Audioguru

Sep 24, 2016
3,650
Joined
Sep 24, 2016
Messages
3,650
It might be a copy of the scanning FM "radio" I bought for $1.00 at the Dollar Store. It uses a Chinese copy of a Philips TDA7088 FM radio IC that does not work well. The radio came with earphones and a battery so the actual radio was free.
 
Top