P
pv
- Jan 1, 1970
- 0
Hi
I have question.
I need remove active RSTDISBL bit attiny2313 in my own parallel
programmer (for AT89 - LPT).
How understanding it, that one pin attiny2313 appointed as XA1/BS2
(ATtiny2313 Preliminary Complete - Figure 69 - Parallel Programming)
appear later as two various signals on Figure 73 (Programming the FUSES
Waveforms) ?
This refer also BS1/PAGEL pin.
I not know how to write procedure canceled this bit - RSTDISBL.
Thank you. Pawel
I have question.
I need remove active RSTDISBL bit attiny2313 in my own parallel
programmer (for AT89 - LPT).
How understanding it, that one pin attiny2313 appointed as XA1/BS2
(ATtiny2313 Preliminary Complete - Figure 69 - Parallel Programming)
appear later as two various signals on Figure 73 (Programming the FUSES
Waveforms) ?
This refer also BS1/PAGEL pin.
I not know how to write procedure canceled this bit - RSTDISBL.
Thank you. Pawel